Instrument Cluster Display / Change Oil Message | How To | 2023 Chrysler 300

Your 2023 Chrysler 300’s instrument cluster display provides important messages and information at a glance, including an automatic oil change message. Learn how to navigate the menus of your instrument panel display.

Transcript

[music playing]

[text on screen] Available features shown throughout.

[voice over] Your instrument cluster display provides important information about systems and features. It also lets you customize a whole range of preferences. You’ll find it on the instrument panel.
Use the steering wheel controls to browse the menus and submenus. Push the up and down arrow buttons to scroll. Push the right arrow button to select. The left arrow button takes you back to a previous menu.

You can learn more about:
• Vehicle information
• Fuel economy
• Warning message displays
• Tire pressure
• Driver assistance features, if equipped
• Trip functions and much, much more.

You can even adjust the display’s appearance – for example, you can customize the information that appears in the display’s upper corners and bottom center area.

[text on screen] Next Up… Change Oil Message

[voice over] Your oil change indicator helps take the guesswork out of oil changes. When it’s time to change the oil, you’ll hear a chime and the “Oil Change Required” message will appear briefly in the instrument cluster. The system is duty-cycle based, so the oil change interval may fluctuate according to your driving style.
Keep in mind, though. Until reset, the oil change message will continue to appear every time you turn on the ignition.

[text on screen] If equipped with Keyless Enter ‘n Go, push the button twice without your foot on the brake.

{Voice over] To reset the system after scheduled maintenance, shift into Park and put the ignition into the On/Run position, but don’t start the engine. Now, fully press the accelerator pedal slowly 3 times within 10 seconds, then cycle the ignition Off.

If you still see the message when you start the vehicle, the system did not reset, and you’ll need to repeat this procedure.
Here’s another way to reset the oil change indicator system after a scheduled oil change. Put the vehicle in Park. With your foot off the brake, push the Engine Start/Stop button twice. The ignition will enter the On/Run position. Don’t actually start the engine though. Now, use the steering wheel arrow controls to find the Oil Life submenu in the Vehicle Info section of your instrument cluster display. Then, push and hold the OK button until the gauge resets to 100%.

This video is not intended to take the place of your Owner’s Manual. For complete details and other important safety information, please see your Owner’s Information.

[text on screen] Copyright 2022 FCA US LLC. All Rights Reserved. Chyrsler and Mopar are registered trademarks of FCA US LLC.